Zhejiang furniture factory sticker wood grain paper sticker table color change picture

Zhejiang furniture factory melamine paper wood grain paper sticker table color change picture

2022-04-18 / Source: Modern Wood Grain Melamine Paper / 276

The wood grain color coffee table is matched with the bright yellow sofa. The visual style is not unified enough, but the furniture is not too flawed. It is reluctant to throw it away. Simply change the color of wood grain melamine paper and use it. [Reconstruction tools]: wood grain melamine paper, utility knife, wool scraper, triangle scraper, edge trimmer, hot air gun

【Reconstruction steps】:
1. Choose a favorite wood grain melamine paper color, as shown in the picture is a white film, which is more simple and modern.
2. Polish the surface of the table. Any table will have stains or an oil film after being used for a long time, so the surface needs to be polished before the film is applied to enhance the adhesion of the wood grain melamine paper. When sticking the film, make sure that the surface is flat. You can touch it with your hand to confirm that it is flat before sticking the film.
3. Be sure to measure the actual size and the part that needs to be reserved before sticking the film. The size of a roll of wood grain melamine paper is 1.22m*50m, which can be spliced ​​to a certain extent, but the splicing method is not the same.
4. The film sticking method must tear off the release paper while sticking it to prevent the adhesive from sticking to other things after the release paper is completely torn off. At the same time, use a wool scraper to remove air bubbles. The material of wool is relatively soft, which is more suitable for flexible films such as wood grain melamine paper. Compared with plastic scrapers, it is more suitable for large-scale discharge of air between melamine paper and the base layer.
5. The sides of the table must be wrapped to last longer, and the corners of the table should also be edge-pressed when cutting. Finally, use a hot air blower to blow molding to prevent the corners from being too hard and cracking.

[Notes]: The treatment of the base layer is very important. If there is a depression on the surface, you can choose to fill it with oily putty and then polish it. Otherwise, the effect of pasting the wood grain melamine paper will be bumpy, which will affect the overall appearance.