Self-adhesive wood-grain stickers are refurbished by filming on load-bearing columns with latex lacquer finish

Self-adhesive wood grain melamine paper is refurbished with film on the bearing column with latex paint finish

2022-06-10 / Source: Modern Wood Grain Melamine Paper / 285

Many people have asked whether the latex paint wall can be directly filmed to change the color and refurbish it? The answer is yes. Latex paint is actually a water-based dispersion paint, which is a kind of paint, so as long as the surface is smooth, it can be directly coated. This time, I made a post in a gas station with wood grain melamine paper. Since the cabinet and the front desk are all wood color, the white support post will appear incongruous, so I chose one of thousands of imported films. A similar color is used as a color-changing film.

First understand what the base material is. The base layer this time is a latex paint wall. Since the wall has been sanded and polished during construction, the surface is relatively smooth. It is only necessary to use sandpaper to polish the surface and clean the dust. You can directly paste wood grain melamine paper.

The second is the question of dosage. The column on the front is 2.9m, and the top of the side is a little higher, so you need to pay attention to the size when sticking the film. Be sure to cut flat at the edges of the seam so it will look more complete.

Many people worry that the edge is easy to warp, so they need to pay attention to these two points: First, because the base layer is flat enough, you can only spray the special glue for wood grain melamine paper on the upper and lower edges of the post before sticking the film, to a certain extent Reduce the possibility of air entering from the edge. Second, it is best to place the seam on a flat surface on the splicing, because the square column has only external corners, so the corners are more likely to be rubbed. Long-term friction will cause the edges to open. Therefore, the lap joint method of pressing the edge is used, so that the seam is not easy to be rubbed, and it will be more durable.