Problems that occur when using PVC decorative film wood grain film to stick cylindrical glass cups

Problems that occur when using PVC decorative film wood grain melamine paper to paste cylindrical glass

2021-12-29 / Source: Modern Wood Grain Melamine Paper / 216

Wood grain melamine paper can be used not only on the wall, but also on metal, glass and other materials. Take the glass cup as an example to analyze the possible problems of sticking wood grain melamine paper on a glass cylinder. 1. First of all, when pasting the cylinder, pay attention to the fact that the wood grain melamine paper should be perpendicular to the bottom surface of the cylinder, otherwise the starting edge and the ending edge will not overlap, and there will be obvious indentations or inconsistent lines. So be sure to mark the vertical point at the very beginning, so that the starting edge is perpendicular to the bottom surface.
2. Although the size of the cup is small, it is necessary to remove air bubbles by hand while pasting, and compact the protrusions and edges, otherwise it is easy to appear bulging and uneven sides in the later stage.
3. Maintain strength when sewing, otherwise the wood grain melamine paper will be deformed due to pulling, and it will cover the other side.
4. For glass materials, it is easy to have a slippery knife when cutting wood grain melamine paper, which will cause more than one crack in the wood grain melamine paper, which may lead to incomplete places after the seam processing. Guarantee the integrity of the wood grain melamine paper. Therefore, we must pay attention to the robustness of the technique during operation, and try to cut along a scratch as much as possible.