Methods and skills of European-style line door sticker decorative film

Methods and skills of European-style line door sticker decorative film

2021-08-10 / Source: Decorative Film / 151

There are many skills about using decorative film to stick doors, especially for wooden doors with European-style lines, how can we operate metal doors to achieve good results. Below are the methods and steps for you. First of all, when pasting a wooden door with European-style lines, we first observe its appearance and then determine his construction method. The following picture is an example, and we will analyze it step by step:

1. The metal door in the picture above has concave and convex lines. For this kind of door, we need to paste the prominent lines first, and then paste the inner panel and the outer facade. (The convex surface is pasted first, and then the convex surface is pressed with the concave surface to close the mouth)


2. The door panel of the semi-finished product in the film is the effect of the above picture. The advantage of sticking the lines first is that when the internal pressure is closed, the bottom is not easily exposed, and the knife edge at the closing position can be hidden and almost invisible.

3. Then use the wood grain decorative film around the bar to perform the filming operation, and the overall effect is presented.

Wooden door film tips:
For such door panels, when filming, a hot air blower must be used to hot blow and press the closing position. This can make the knife edge more hidden and invisible, and at the same time increase the service life. In addition, people who are not at the master level should not challenge the use of a piece of wood grain melamine paper for construction. If there is a slight operation error, the overall effect of the paste will be greatly reduced.