Interpret the problems that need to be paid attention to in the construction of wood grain film in winter

Interpretation of the problems that need to be paid attention to in the construction of wood grain melamine paper in winter

2021-01-02 / Source: / 112

After entering the winter, how to construct the wood grain melamine paper construction project to avoid after-sale and rework? Many friends often have many unexpected problems when filming things. Today, I will analyze how to carry out the construction of wood grain melamine paper in winter. Let's start with the temperature environment of the wood grain melamine paper film construction. If the temperature is too low, the wood grain melamine paper will become brittle, the adhesiveness of the glue will not reach, it is easy to break, peeling, and the glue viscosity will not reach, which will make the later stage. There are many cases of rework, so how to apply the film in the sub-zero temperature in winter, the editor will give you a few suggestions:

A1: Use genuine imported primer, which is a necessary material for sticking wood grain melamine paper. In winter, when the primer is diluted, it should be diluted at 1:0.5 (primer: water) and used at the joints of the corners. The original slurry primer is brushed, which can ensure the stickiness of the glue.
A2: The heater is installed, the air conditioner can be turned on in the room where conditions permit, and the film construction can be carried out after the indoor temperature rises. If there is no air conditioner, you can use a heater to raise the problem and then stick the film, so that after the film is applied, it is necessary to ensure that the temperature does not drop sharply for a period of time. Conditional parents can use.
A3: To create a closed space, this can be made of plastic film and other materials, and the doors and windows of the film area are closed with plastic film, and then the film construction is carried out in the absence of cold air. When applying primer, refer to A1 for operation, which can also be avoided. Later rework. It should be noted that after the film is applied, do not remove the plastic film immediately. After the glue is fused, the removal process may take more than 2 days.

The above are the preparations for the film in winter. In actual operation, it is also necessary to use the appropriate tools to apply the film:
B1: Wool scraper, this film needs to be used in winter, because the membrane will become hard and brittle in winter. Using the wool scraper can avoid damage to the membrane.
B2: Grinding the sandpaper. After applying the primer in winter, it is easy to cause agglomeration. After the primer is applied, it is necessary to carry out basic grinding, and smooth the rubber block and the uneven place.
B3: Hot air blower, after the film is applied in winter, the hot air blower can be used at a constant temperature of 80°At the same temperature, hot blow the pasted parts, so that the wood grain melamine paper can be prevented from bubbling and peeling.

The above are some of the skills summarized during the construction of the film on the construction site in winter. I hope it will be helpful to the parents of the wood grain melamine paper film.