How to stick wood grain film on the steel pipe for better effect

How to paste wood grain melamine paper on steel pipe better

2021-12-14 / Source: Modern Wood Grain Melamine Paper / 200

Wood-grain melamine paper is very inclusive and can be used on different planes. Now I will use two cases to explain how to paste wood-grain melamine paper on steel pipes. Wood grain melamine paper is very inclusive and can be used on multiple planes. Now, I will use two cases to explain how to paste wood grain melamine paper on steel pipes.
1. Basic treatment of the construction surface: The metal joints and welds should be filled with oily putty, and the repair is completed. After drying, they should be polished and smoothed. The construction surface should be smooth, flat, free of concave protrusions and excess welding scars.
2. Confirmation of the construction of the base layer: Wipe all the film areas on the base layer with thinner to remove surface dust, oil stains and stains to avoid sticking effect and quality. (Alternatives to thinners: Banana water, Tena water, alcohol, etc.)
3. Brushing with water-based special glue: Apply water-based special glue to the corners. Since the water-based special glue will not penetrate into the metal base board, wipe the residual water-based special glue with a hot towel.
4. Construction surface measurement: record the measured data, the measured length is 2-5cm more than the actual size, and the width is 1-2cm more than the actual size, depending on the quantity here.
5. Finally, paste the wood grain melamine paper.