How to stick invisible doors with wood grain film Boeing paper - tutorial

How to stick invisible doors using wood grain melamine paper Boeing paper - tutorial

2021-12-13 / Source: Modern Wood Grain Melamine Paper / 198

How to use wood grain melamine paper for construction of invisible doors in order to achieve the invisible effect. What details do we need to pay attention to when we paste the door in order to achieve the final effect. The following is a brief explanation for you. First, the basic repair of ordinary doors with door sleeve lines can be used to cover the ugly. The invisible door film basically has no door sleeve line, and the gap between the door panel and the wall needs to be leveled with putty. This is very critical. If the gap is not leveled and there is a bump after the film is applied, the effect of the invisible door will be ugly.

2. The step of polishing and smoothing the foundation can refer to the foundation of the paint. When the putty is batch seamed, there will be a problem of shrinkage. Therefore, it is necessary to batch the putty 2-3 times before the film is applied to ensure that the base layer will not sag. 3. The ratio of brushing and applying base oil can be slightly smaller, so that there will be no problem of bubbling and rounding at the corners. The position of the edge must be compacted and scraped flat. Fourth, when sticking wood grain melamine paper, try to use a piece of film for paving, do not appear splicing interface, so that the invisible effect is better. 5. At the end, use a hot air blower to blow all the edges and corners pasted with the wood grain melamine paper and compact them. This increases the service life of the invisible door. In the end, the best effect can be achieved.