How to renovate and renovate the cabinet with Boeing paper wood grain film to be complete

How to refurbish and renovate the cabinet with Boeing paper wood grain melamine paper to be complete

2022-01-06 / Source: Modern Wood Grain Melamine Paper / 226

For the cabinet, there will be many shapes, how to make the surface look more complete, you need to use different corner sticking methods for each different grid. Use an actual case to introduce how to paste wood grain melamine paper on the surface with included angle. 1. The first side and the second side
(1) You can measure the size of the bottom surface first, reserve about one or two centimeters, and then cut the wood grain melamine paper of the appropriate size.
(2) Position the film from the side, lay the bottom surface flat, remove the air bubbles, compact the inner corner, and then cut off the excess wood grain melamine paper along the angle between the two sides.
(3) And so on, the internal four sides are operated in this way.
2. The third side
(1) It is necessary to paste a complete wood grain melamine paper on the frame outside the grid first
(2) Then cut along the inner part of the frame, so that the cut wood grain melamine paper is just the size of the third side.
(3) Finally, paste the cut wood grain melamine paper to the inside, and compact the surrounding edges.
Notice:
(1) Be sure to reserve extra wood grain melamine paper before cutting the wood grain melamine paper, so as to avoid insufficient wood grain melamine paper when pressing the closing part, there will be a small amount of white space, making the surface incomplete.
(2) The wood grain melamine paper comes with self-adhesive. If the furniture is refurbished in a large area, it can be considered whether it needs to be painted with primer to increase the viscosity.
(3) Finally, use a hot air gun to heat the finish, which can not only make the wood grain melamine paper heat shrink to fit the cabinet better, but also melt the back glue of the wood grain melamine paper to a certain extent and increase the adhesion to the base layer.