How to paste wood grain decorative film on office cabinets-PVC film construction

How to paste wood grain decorative film on office cabinets-PVC film construction

2021-12-08 / Source: Modern Wood Grain Melamine Paper / 193

Share a set of office filing cabinets, the case of using white modern decorative film construction. The cabinets are made on-site using boards, and later, the white decorative film is applied to change the color of the film. The effect of the opaque background color after the film is as follows:
The requirements for the decorative film on the cabinet are relatively strict, especially when the decorative film of solid color and light color is used. Let's share with you the order and method of our daily cabinets

1. Basic inspection and repair, this is the most important part of applying light-colored decorative film. The white decorative film does not hide the ugly, if the base layer is not flat, it will be ugly after the film is applied.

2. Apply primer, the ratio is not as thick as possible. The function of the primer is to increase the hardness of the base layer of the film and increase the viscosity to a certain extent. If the primer is applied too thickly, the penetration effect will be greatly reduced. The right ratio is the best.

3. Grinding the base oil, many friends think that they cannot be polished after applying the base oil. This is wrong. After the primer is painted, wait for the film to dry naturally and use fine sandpaper to polish it again to avoid the existence of glue spots and particles, so that the film will be smoother after the film is applied. This step must be done.

4. Wood grain melamine paper filming steps. In this part, we often mentioned the order of closing in the previous wood grain melamine paper construction tutorial. Not going into details here. Only one point is that the position of the folded edge must be compacted, and there should be no hollowing problem.