How to paste the wood grain film to change the color of the door - PVC film case

How to paste wood grain melamine paper color change door - PVC film case

2021-11-30 / Source: Wood Grain Melamine Paper / 186

How to use wood grain melamine paper to change the color of the film on the door It is wood grain melamine paper for film color change. We can see through observation that its shape is relatively deep. If the whole wood grain melamine paper is used for hot pressing, it will shrink after a period of use. Eventually, the bump shape may become flat and lose its original shape, which is ugly. . Our film needs to be constructed by the method of splicing film.

1. The method of cutting and sticking film by area, this needs to be filmed in order from the inside and the outside. Paste the inside first. It should be noted here that the size of the cut should be larger than the size of the film area. Do not overlap too much at the closing position, and try to close the opening at the inner corner.

2. After the film is pasted, use a hot air blower to heat press the closing position or the position that is easier to warp. This process requires the experience of the film and the user's usage habits. The final effect is shown in the picture above. There is a huge difference before and after the color change. The effect of using wood grain melamine paper to change the color is consistent with the interior decoration style, which greatly improves the visual effect.

Final summary: When using wood grain melamine paper to change the color of the door, it needs to be constructed in sequence according to the site conditions, and the responsible modeling must be refined. In this way, high-quality effects can be exhibited.