How to paste pvc decorative film

How to paste pvc decorative film

2020-09-29 / Source: Wood Grain Melamine Paper / 102

How to paste pvc decorative film wood grain melamine paper? Be sure to start with these. It's easy to follow step by step. 1. Before getting the PVC decorative film, you need to check the basic effect of the film position. The basic effect is as long as the flatness reaches the standard. So how to detect the flatness of the base layer? Let me tell you a little trick. When testing the flatness of the pasted base layer, you can use a horizontal ruler to stick it close to the base layer, and then insert a piece of A4 paper to see if it can be taken out smoothly. , is basically uneven. In addition, use a flashlight to light from one side to see if the effect of light transmission is uniform, which can also be detected. After the flatness is achieved, I will look at the material problem of the base layer.



2. Apply the primer, and apply a special primer on the flat base before applying the film. This is very particular. First of all, remember not to over-dilute in order to save money on dilution, then you will lose more if you basically can't use it. Moreover, it is the polishing of the primer. Many friends don’t understand why it is necessary to polish after the primer is applied, because it needs to wait for the primer to dry after painting. During this process, particles or glue spots will appear on the surface. If paste directly, it will appear“pockmarked face”. After the primer is dry, simply sand it with a fine gauze cloth to apply the film.



3. The methods and techniques of applying PVC decorative film, this is also the final step. After the novice is on the road, there will be blistering, unevenness, dead folding and other problems. Don't panic. The master will tell you how to avoid this situation.
Don't panic when sticking the film first, first make a gesture to see if the cut film matches the pasting position. Before sticking the film, it should be positioned from one side, and then pushed to the other side. The release paper should not be removed at one time, but the release paper should be removed while pushing, and every place needs to be compacted. This can avoid the occurrence of blistering, and there will be no dead folding phenomenon, and the effect will be smooth after the film is applied. Even if there is a problem in the middle, it can be corrected in time.

After understanding these film tips, it will help you step into the door on the road of PVC wood grain melamine paper decorative film. The film industry is not difficult, the difficult thing is to maintain a normal attitude, the film is not impatient, pay attention to details, this is the necessities of PVC decorative film.