How to construct PVC decorative film wood grain film to change color special-shaped counter

How to construct PVC decorative film wood grain melamine paper to change color special-shaped counter

2021-12-31 / Source: Modern Wood Grain Melamine Paper / 222

The renovation of the special-shaped surface is a kind of troublesome operation. Whether it is the flatness of the curved surface or the accuracy of the grid size, it is necessary to consider these existing problems before sticking the wood grain melamine paper. Therefore, for a special-shaped multi-compartment counter, we will analyze the smooth and wrinkle-free desktop required to solve these first curved films, so the construction steps are as follows:
1. Spread a piece of wood grain melamine paper on the straight part of the counter top.
2. Use a hot air gun to pull the wood grain melamine paper to the other side while blowing at the curved place.
3. Flatten the entire surface and remove air bubbles.
4. The side part also needs to use a hot air gun to pull the wood grain melamine paper while blowing, so that the wood grain melamine paper fits the arc of the side more.
5. Close the mouth at the inner corner of the side, so that it is not easy to see the interface will be more beautiful.

The thing to pay attention to when sticking wood grain melamine paper on the lattice cabinet is the size, so you should do this:
1. First stick a whole piece of wood grain melamine paper on the outer frame of the lattice cabinet.
2. Cut according to the width of the border, and the cut part is exactly the innermost size of the grid.
3. You can use a piece of wood grain melamine paper on the inside of the cabinet, cut the width and paste it along the inside, pay attention to compact the inner corners.
4. Finally, use a hot air gun to blow the entire cabinet, deal with the details, make the wood grain melamine paper fit the counter better, prevent the generation of air bubbles in the later stage, and prolong the service life.