How to apply PVC wood grain decorative film to the cabinet - case analysis

How to apply PVC wood grain decorative film to the cabinet - case analysis

2021-04-01 / Source: Wood Grain Melamine Paper / 119

Can the cabinets customized on the construction site be pasted with wood grain melamine paper? What materials can be used for custom cabinets that can be quickly filmed? The editor will share with you a set of practical cases about cabinet film, hoping to help friends.
The cabinet in the picture above is a solution for the hotel to refurbish and change the color. In order to reduce the cost, the original cabinet was re-filmed with wood grain melamine paper products to change the color. When this type of cabinet is filmed, you need to pay attention to several aspects:
1. Fill the gap. After long-term use, the old cabinet may have gaps, scratches, missing corners, and peeling problems. During construction, first use putty to level and fill the gaps.
2. Clean the surface, and clean up the dirt, oil, etc. on the surface of the old cabinet. This avoids the problems of non-stick, bubbling, and starting points on the back of the film.
After the above two steps are completed, the film construction can be carried out.



The cabinets pictured above are custom made on site using panels. When filming, we can carry out filming construction according to the actual materials. The usage rate of such cabinets is relatively high, so it is recommended to use wood grain melamine paper and wood grain melamine paper for construction. These two wood grain melamine papers have better wear resistance and stable adhesive performance. There are several aspects that should be paid attention to when filming such cabinets:
1. Before sticking the film, consider the reserved position of the corners. In the picture above, it is a vertical cabinet without a back baffle. The corner closing position must be placed on the inner corner/yin side, so that the film is more durable and more beautiful.
2. Fill in the gap, check the splicing position of the cabinet board seam to ensure that there is no gap larger than 1 mm, if there is, use putty to fill it. In this way, the problem of crack exposure after the film is applied can be avoided, and the waterproof effect can also be increased.

——————Cabinet stickers wood grain melamine paper case show————