Explanation of the construction method of decorative wood grain film for wooden door stickers

Explanation of the construction method of decorative wood grain melamine paper for wooden door stickers

2021-07-28 / Source: Wood Grain Melamine Paper / 142

Property rooms, hotel renovations, hospital school renovations, etc. will all have some refurbishment films for wooden door frames. When we use wood grain melamine paper to film them, we can refer to the following filming methods:

The above picture shows the effect of the wooden door after filming. The wood grain melamine paper is used for filming construction. The overall effect is of outstanding solid wood texture, and the splicing gap is almost invisible. When considering the wooden door film, the specific construction methods can refer to these:

01. For the upper and lower top positions, when we stick the film, it is recommended to fold the wood grain melamine paper more than 1 cm in (full sealing is also possible). In this way, there will be no curling problem caused by opening and closing the door in later use.

02. The left and right sides also need to be edge-pressed. First paste the front, and then paste the back. Use the film on the side of the back to press the film on the front. You can cut the edge within 1 cm of the right-angle mouth. Remember not to put the bottom. The film is cut, which can increase the service life.

What other tips can you share about the construction method of using wood grain melamine paper to change the color of wooden doors?

Film tips:
Wooden doors often need to be opened and closed. The details of the film are more about not allowing the knife edge to be exposed in the position that users often touch, so sticking wood grain melamine paper is more about details to avoid all kinds of bad problems in use. cause rework.