Explanation of the construction method of decorative film - special-shaped door film

Explanation of the construction method of decorative film - special-shaped door film

2021-04-21 / Source: Wood Grain Melamine Paper / 122

Different styles of modeling, when using wood grain decorative film construction, we need more how to present the best effect. Before sticking the film, consider the closing, materials, construction methods and skills. Today, I will give you a case of using pure white wood grain melamine paper to paste special-shaped cabinet doors for your reference.

1. The effect in the above picture is the effect after using wood grain melamine paper film. As shown in the picture, the cabinet door has a concave and convex surface, and the inner corner has more details. When selecting materials for this type of effect, domestic films cannot be used, because their elongation properties are not strong, and they are prone to breakage during the filming process. Below are the steps for you.



2. Clean the surface of this type of product before applying the film. After applying the primer, dry it and polish it lightly, and smooth the glue point. We need to extend the construction from the middle to both sides. The surrounding material should be at least 5 cm larger than the area of ​​the film to avoid gaps after the film is applied.


3. With the help of a hot air blower, local hot blowing, pressing out the details of the edges and corners, and then rushing to both sides, this operation is to avoid bubbling and air bubbles. The localized heating operation is to prevent excessive deformation of the membrane. Construction from the inside out can improve fault tolerance.



4. The corner closing in the above picture is in line with the corner of this kind of foundation. When we consider the closing, we need more characteristics of the corner to determine the construction plan. For example, for right angles, we use the method of lateral pressure incision. The corners in the picture above are inward-shaped arcs. If the incision method is used, the beauty and service life of the corners will be reduced.



5. After the film is applied, the details can be repaired, and the delivery can be completed.

Remarks: There are many advantages of using decorative film for this kind of foundation, the first is waterproof and anti-fouling. After the film is applied, it can be wiped with a damp cloth. The second is the wear resistance and stickiness, which are guaranteed, and there will be no problems in 8-10 years of use.