'Experience' What kind of glue can be used for pvc wood grain film on the wood

'Experience' What kind of glue can be used for pvc wood grain melamine paper to stick to the board

2020-06-16 / Source: Wood Grain Melamine Paper / 68

In tooling and home improvement, such problems are often encountered. After the woodworker completes the construction of the infrastructure, it is necessary to carry out film beautification. When pasting wood grain melamine paper before, the film will peel off after pasting it, the corners will not stick tightly, and the sticking will be uneven. How to solve this? The following analysis for you. First of all, PVC wood grain melamine paper can be pasted on the wooden board. Several processes before pasting need to be handled well.

1. The first is to choose wood grain melamine paper products. It is recommended to choose imported wood grain melamine paper products for furniture, tooling and other scenarios. Its material adhesive is relatively stable. After pasting, the effect is obvious and the service life is long. Wood-grain melamine paper has many color lines and textures, and the color and texture of wood-grain melamine paper can be selected according to user needs. 2. Then there is the treatment of the base layer. If you use a plate with a relatively flat surface layer, you only need to fill the nail holes and splicing interfaces with atoms. If other wood boards are used, the surface of the board needs to be leveled, and the gaps and grooves need to be filled. Make sure the surface is flat.

Moreover, the aspect of pasting is also the highlight. After the base layer is processed, 1. It is necessary to use a special primer to evenly brush the pasted position (the primer needs to be diluted in a ratio of 1:2 or 1:4), and the large plane For construction, you can use 1:4, and if you have a special-shaped surface, you can use 1:2. 2. The wood grain melamine paper product is a 50-meter-long roll + 1.22-meter width. When pasting, operate according to the size of the pasting position. Leave the seam that needs to be present in an inconspicuous position. 3. The position of the stitching seam is laminated and pasted. The position of the laminated seam also needs to be brushed with primer. Tips: After the PVC wood grain melamine paper is brushed with primer, it needs to be left to dry for 10-20 minutes. Then paste. So what kind of glue can be used for pvc wood grain melamine paper to stick to the wood, it must be a special imported primer!