'Experience' Tips on how to deal with gaps with wood grain film

'Experience' Tips on how to deal with gaps with wood grain melamine paper

2020-06-15 / Source: Wood Grain Melamine Paper / 67

When many friends came into contact with wood grain melamine paper for the first time, they saw that the whole sheet was pasted very smoothly and could not find any gaps and joints. They did not understand or had small problems. Now I will give you some tips on how to deal with gaps with wood grain melamine paper. How to deal with gaps in wood grain melamine paper film, you need to pay attention to some small details when operating.


1. The choice of the base layer, generally when dealing with large-scale film construction, try to choose a material with a relatively flat surface as the base layer, such as a board.
2. The details of splicing, such as the base layer of the board used, when splicing the two boards, try to make the splicing gap on the same plane. Some workers do not pay attention to this detail during construction, and often the boards are placed one after the other. Bad experiences are prone to occur. The error should be within 1mm as far as possible
3. The splicing gap, the smaller the splicing gap, the better. This requires careful operation during the preliminary construction of the base. If there is a relatively large seam, when the film is applied later, it needs to be filled and leveled. You can use materials such as putty to fill the gap.


4. Defects in the basic decoration, this needs to be dealt with when the decoration is not in place. This situation often occurs in corners, tops, and joints.
When using wood grain melamine paper film, the film master needs to enter the venue and check the details of the place where the film needs to be applied. For the place that affects the effect of the film, it is necessary to communicate and coordinate to solve the problem. This is also a necessary step in the construction of wood grain melamine paper.