Construction Tutorial on Using PVC Decorative Film Wood Grain Film on Security Doors

Construction Tutorial for Using PVC Decorative Film Wood Grain Melamine Paper on Security Doors

2021-12-30 / Source: Modern Wood Grain Melamine Paper / 219

Safety passages are important places in public places, and the flame retardant effect of wood grain melamine paper is very suitable for the decoration of safety doors. So by installing the door of the safe passage, we will introduce the construction process of sticking wood grain melamine paper. 1. Measure the height and width of the door frame, as well as the size of the area above the door frame, and cut an appropriate amount of wood grain melamine paper in advance.
2. Remove the door panel, first coat the door frame and the top, and the door panel with a layer of primer to ensure that the surface of the base layer is smooth and clean, and then start to paste the wood grain melamine paper after drying.
3. There are several internal and external corners on the top of the door frame, so use a wool scraper to exhaust the air when filming, and then use a triangular scraper to compact the edge part to make the wood grain melamine paper closely fit the base to prevent air bubbles produce.

4. The door panel needs to pay attention to the handle part, reserve the position of the handle in advance, then cut a hole with a utility knife, and then exhaust and flatten the wood grain melamine paper along the position of the hole, so that it will not affect the later stage. Aesthetics.
5. Use a hot air gun to blow the finish to make the wood grain melamine paper more fit to the base layer after shrinking.
6. Finally, install the door panel.