Construction methods and skills of sticking 3M wood grain film decorative film on the base of the board

Construction methods and skills of sticking 3M wood grain melamine paper decorative film on the base of the board

2020-05-12 / Source: 3M Wood Grain Melamine Paper / 41

In the current decoration market, more boards are used as the base board. When sticking 3M wood grain melamine paper decorative film on the board, what problems should be paid attention to, and how to solve the common problems? Before understanding the 3M wood grain melamine paper pasting process, let's first understand the board. It is a medium density board, and some users call it a large core board. High-quality board, internal bonding strength, the board surface of each board is sanded with high precision, and the surface is flat and smooth. However, during installation, operations such as cutting, nailing, and splicing will cause uneven damage to the surface.
Before pasting, it is necessary to fill the gaps according to the actual situation of the board surface. For the specific filling parameters, please refer to 《》. After ensuring that the base layer is flat, brush the primer used for 3M wood grain melamine paper on the surface. The primer ratio is 1:2, do not make the ratio too large, it is easy to cause blistering, peeling and other phenomena in the later use of 3M wood grain melamine paper. 3M wood grain melamine paper large plane paste: According to the actual paste size, plan and cut the 3M wood grain melamine paper, paste it on the surface of the board that has been brushed with primer, and then scrape it from top to bottom and compact it. Where the joints are spliced, it needs to be stacked about 1cm, and the primer should also be supplemented in the stacked area. 3M wood grain melamine paper modeling construction method after pressing and scraping: Sometimes, according to the needs of customers, some effects of the opposite sex will be designed with boards. When pasting wood grain melamine paper on the opposite sex surface, a hot air blower is needed, and the bending corners are first blown with a hot air blower, and then compacted and scraped firmly with a scraper. Do not use too much force during this process, and remember not to heat for too long. Overall, 3M wood grain melamine paper decorative film products can be perfectly pasted on the board.