Construction method of wood grain film for invisible door - wood grain decorative film

Construction method of wood grain melamine paper for invisible door - wood grain decorative film

2020-08-20 / Source: / 90

Invisible wooden doors need to pay attention to several details when filming. The effect posted in this way can meet the requirements of designers and the needs of users. Let me tell you about the method of sticking wood decorative film for invisible doors and make progress together. First of all, when using wood grain melamine paper to paste the invisible wooden door, it is necessary to measure the flatness of the wooden door. If the thickness of the door frame and the wooden door are different, when the film is applied later, it is not on a horizontal line, then the finished wooden door will be gone.“hidden door”properties. The overall effect cannot be achieved. Leveling the wooden door. When installing the wooden door, it is necessary to measure the size of the door frame and the wood grain melamine paper accurately, and the flatness can be achieved after the production and installation. After some wooden doors are installed, the size of the door frame and the wooden door are often different, which requires filling and grinding of the door frame. The following picture shows the construction case for everyone to analyze

Problem description: 1. The invisible door as shown in the picture, the size of the production is inconsistent with the frame of the wooden door. The whole is much smaller, resulting in different degrees of gaps on the top, left, and right. If the wood grain melamine paper is directly used for film construction, there will be foaming and collapse problems in the later stage. 2. The upper and lower distances of the frame of the wooden door are different, the middle is concave, and the two ends are not parallel, which has a great impact on the construction film. 3. The slots on both sides of the invisible door are not in line with the wooden door frame. After the film is applied in this way, the visual effect is not uniform.

Solution: 1. Fill the three sides of the wooden door frame. This can be filled with materials with sufficient hardness, and then flattened with putty. 2. The top groove is re-grooved and the original two grooves are filled. This can ensure that the two gaps after the film are on the same level. 3. Film construction, this requires more wood grain melamine paper texture direction for film construction. When cutting, pay attention to the effect of the texture, and the best effect can be achieved after the film is applied. For the film construction method of wood grain melamine paper, you can check http://www.muwenmo.com/shigong/ A good wood grain melamine paper film process can make your finished product look better, and it can also increase the wood grain melamine paper. service life.