Cleaning the home base, filling the gaps → attaching the seam tape to the joints of the gypsum board, patching the putty, sanding paper → scraping the putty, smoothing → applying the moisture-proof agent

→ Apply primer → wall elastic → wallpaper soaking → wallpaper and base coating adhesive → wallpaper cutting paper, brushing glue → wall lamination, patchwork, lap joint, flower alignment → pressing adhesive bubbles → wiping Net glue → trim.

Precautions for laminating furniture paper:

1. When the base layer is treated, it must be cleaned, flat and smooth, and the moisture-proof paint should be applied evenly and should not be too thick.

(1) Concrete and plastering base: clean the wall surface, and level the surface cracks, potholes and unevenness with putty. Scrape the putty again and smooth it. Decide how many times you need to scrape the putty.

(2) Wood base: The wood base should be planed without burrs, stubble and exposed nail heads. Fill the seams and nail holes with putty. Fully scraped with putty and smoothed.

(3) Gypsum board base layer: The gypsum board joints are treated with caulking putty, and the joints are attached firmly. Scrape putty on the surface.

2. Generally, 107 glue is used for brushing the primer, and the primer survives once, but there can be no omissions.

3. In order to prevent wallpaper and wall covering from falling off from moisture, a layer of moisture-proof paint can be applied.

4. Play the vertical and horizontal lines to ensure that the wallpaper, wall covering is horizontal and vertical, and the pattern is correct.

5. Plastic wallpaper will expand when it encounters water, so it is necessary to moisten the paper with water to fully expand the plastic wallpaper. The glass fiber-based wallpaper, wall covering, etc., will not expand and contract when exposed to water, so there is no need to moisten the paper. Composite paper wallpaper and textile fiber wallpaper should not be stuffy.

6. After pasting, press the wallpaper adhesive without leaving any air bubbles, and the extruded glue should be wiped clean in time.