Briefly describe the common problems after melamine dipped paper pressing

What are the common problems after the melamine dipped paper is pressed? The melamine impregnated paper will be introduced to you in detail.

The phenomenon of dry flower may be due to poor flow of resin and insufficient dipping amount; defective substrate and backing plate; excessive hot pressing temperature. At this time, we can prescribe the right medicine, reduce the hot pressing temperature, increase the pressure of the equipment, and prolong the pressing time. Check the sanding degree of the surface of the substrate, and whether the backing plate and buffer pad are hollow. When wet flower phenomenon occurs, generally because of short hot pressing time, low temperature, low pre-curing degree, and high moisture content of substrate. At this time, we should extend the pressing time, increase the hot pressing temperature, and check whether the dipped paper is too wet. The substrate storage environment must be dry and the humidity should not be too high.
The common problems after melamine dipped paper lamination are more than these points. In short, we need patience when operating, and strive to achieve the correct standard in every step, which will reduce the occurrence of many problems.
The above is the content introduced to you, you can learn more about it in detail, I hope it can help you.