Analysis of the problems that need to be paid attention to in the construction of special-shaped decorative film

Analysis of the problems that need to be paid attention to in the construction of special-shaped decorative film

2021-10-21 / Source: Modern Wood Grain Melamine Paper / 169

There will be a certain loss in the construction of decorative film, especially in the construction of special-shaped effect, how can we reduce the loss of film through a reasonable method without delaying the final effect of the film, then you need to pay attention to these problems about the special-shaped decorative film When using wood grain melamine paper to film in special-shaped construction sites, it is necessary to pay attention to these problems to reduce the loss:


01. The problem of texture trend: For example, how do we use the horizontal stripes to apply the film in the top wavy type in the picture above, and there is a great loss in the uneven position. For such products, we can consider using vertical stripes, and vertical stripe splicing is not easy. Check the basic splicing gap, use one on the convex surface and one on the concave surface, which can reduce the loss of the film.

02. Material selection problem: For example, the top wave shape, it is recommended to choose decorative film products with relatively deep lines. When professional construction of vertical lines, the splicing gap is basically invisible. Do not appear splicing in the position illuminated by the light. gaps, so as to keep the veneer flat and beautiful.


03. There is a problem of a special-shaped tree in the above picture. The material film must use vertical stripe film, and the effect is the best after filming. The wood grain melamine paper in the big tree area can be constructed first, and then the top film construction can be carried out.

Regarding the use of wood grain decorative film to film special-shaped surfaces, we also need to use a hot air blower for film assistance. It should also be noted that the location of the incision should be avoided as far as possible from the area where the light is illuminated.