Analysis of possible problems on how to use wood grain paper to stick cabinets

Analysis of possible problems on how to use wood grain paper to stick cabinets

2022-05-12 / Source: Modern Wood Grain Melamine Paper / 280

The way to change the color of furniture is generally to paint or melamine paper, so what problems will you encounter when choosing formaldehyde-free wood grain melamine paper as the color-changing material? Let's take a look. The first is the problem of grassroots treatment. The effect of sticking wood grain melamine paper on the base layer that is not flat is also uneven.
Many of the furniture that needs to be changed are old things that have been used. If there is no major problem as a whole, it is necessary to change the color to match the overall style of the room. Then the first thing you need to do is to clean the surface, such as glue stains, grease, dust, etc., the sunken scratches, or the lifted skin, etc. need to be filled with vouchers. It is best to use oily putty to fill it up and wait for it to dry. It is also not easy to be contaminated with dust or dirt.

The second is the process of sticking wood grain melamine paper, and the lack of details will lead to a very poor overall effect.
This is mainly due to the seriousness of the construction. There is no one-size-fits-all cutting edge, and it is easy to leave extra thin lines. There is no need to cut with a cutting ruler, and there will be blanks or exposed bottoms. The lap joint method is not well done, the seam is located at the outside corner, and the place where the surface is often rubbed is prone to curling, and the use effect is not good.

The third is the problem of late foaming.
The reasons for the blistering may be that the base layer is not brushed with primer, the weather temperature is low and the back glue effect is not done well, and the construction is not fully compacted, causing air to enter, etc.

Therefore, after the wood grain melamine paper is completed, it must be checked again for these problems. It is best to solve these problems during the construction period to prevent troubles in later maintenance.