Analysis of how the metal base layer is pasted with wood grain film and wood grain paper, what needs to be paid attention to

Analysis of how the metal base layer is pasted with wood grain melamine paper and what needs to be paid attention to for wood grain paper

2020-05-15 / Source: / 44

Some users have inquired that the base layer after decoration has a metal surface, so can wood grain melamine paper wood grain paper be pasted on the metal base layer? Today, I will give you an analysis one by one. In the process of tooling and decoration, the commonly used metal base layers are painted steel veneer, galvanized steel plate, polyethylene steel plate, aluminum, stainless steel, copper and lead plate. When using wood grain melamine paper decorative film for construction, there are different construction methods according to different materials:

The first type: Painted steel veneer, galvanized steel sheet, polyethylene steel sheet, aluminum, and stainless steel metal panels can be directly pasted with wood grain melamine paper during construction.


The second is the copper surface base layer, which requires special treatment. Before pasting, it is a special primer on the copper surface, and then pasted. In this way, there will be no blistering and peeling problems later on.

The third type is lead plate, which cannot be pasted with wood grain melamine paper during construction of this metal surface. Brushing on the base oil can not solve the problem of foaming and peeling that occurs later. Therefore, do not consider using wood grain melamine paper directly on such surfaces.

It should be noted that before pasting, it is necessary to clean up the sundries, oil, metal chips, etc. on the metal surface. In this way, it can be well scraped during construction. At the corners, the sharper corners need to be blunt and smoothed first. In this way, it is not easy to scratch and cut the wood grain melamine paper when it is pasted to this position.