The construction process of how to stick the wood grain film to the striped profiled surface

Construction technology of how to paste striped profiled surface on wood grain melamine paper

2020-06-12 / Source: Wood Grain Melamine Paper / 65

In the tooling decoration, there are many special-shaped decoration effects. Today, the editor will share with you the effect of a striped special-shaped intermediate belt double ring design using wood grain melamine paper film construction. The process and method of pasting are as follows. When using wood grain melamine paper to construct the special-shaped base, the required operation method and construction process are as follows:

The first step is to make the foundation: When making the foundation, you can use aluminum square pass, or directly use gypsum board and board for modeling according to your construction needs. It should be noted that the splicing gap of the base layer should be less than 1mm. The nail holes at the nailing position should be filled with putty. The second step of circular processing: When making the circle in the middle, it can be cut with a plate. Use glue to stick together. Make a shape. The third step is to paste the film (): you can first paste the wood grain melamine paper in the stripes and circles, and use the whole sheet to paste. You can use a hot air blower to blow it for special-shaped stretching or groove bending and paste. Before pasting, you need to Brush on the special primer and let it dry for more than 10 minutes. After the film is completed, it can be put into use. It should be noted that when pasting the circle, you can paste the three circles first, and then glue them together for installation. The wood grain melamine paper product has the effect of stretching, good flexibility, and is more efficient in the treatment of special-shaped surfaces in decoration equipment. Wood grain melamine paper products can be applied to a variety of base layers, so they can also be used in various types of flat construction.