loading

Methods and techniques for changing the color of hotel bedside film with wood grain decorative film

by:I.DECOR     2022-09-10

Methods and techniques for changing the color of hotel bedside film with wood grain decorative film

2021-09-25 / Source: Decorative Film / 166

It is more troublesome to replace the old bedside of the hotel, and it also lowers the image and atmosphere of the hotel. We can achieve the best effect at the lowest cost by decorating the film. The specific cases and filming methods are as follows , construction waste transportation and other expensive costs. It also makes the hotel unable to operate normally in the short term. We can update it without affecting normal business through decorative film products:

First: Regional analysis of wood grain melamine paper film
The picture above is a bedside of an old hotel. It is made of decorative plates directly on the wall. The color is old, but as can be seen from the picture, the local details are basically not seriously damaged, so that the construction can be directly arranged. No underlying repair required.
Second: film process analysis / film preparation
The head of the bed is assembled from divided pieces, there are 45 degree seams, and the base is wood grain paint. Similar to this shape, we need to use a hot air blower during construction. The film preparation work includes: brushing the primer (focusing on painting the 45-degree splicing interface), surface oil and dust treatment, and removal of surface particles (use a clean towel to wipe it clean) Can)
Third: the film process method
This type of film is recommended to be divided into pieces, measure the net size of an area, and increase the loss of 3-5 cm on this basis. When filming, pay attention to the flatness of the surface, and use a wool hanging board to flatten it. At the position of the docking port, especially the four corners of the top, bottom, left, and right, you can use a hot air blower for hot pressing.

After the film is finished, be sure to use a hot air blower to heat all the edges at 45 degrees, so that the problem of curling and bubbling will not occur in the later use.
The method and skills of using wood grain melamine paper to change the color of the hotel bedside film have been learned. The finished effect of the wood grain melamine paper film in the picture above is very high-grade.

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...