Korean wood grain decorative film to display the effect of film construction on the fence
by：I.DECOR
2022-09-23
Korean wood grain decorative film to display the effect of film construction on the fence
2021-06-11 / Source: Wood Grain Melamine Paper / 129
How to use decorative film for a wooden fence made of boards. Let us illustrate with a case.The fence effect in the picture above is made using a board. What needs to be understood is that there are many splicing gaps in the fence made of boards. We will repeat the old saying that we need to fill and repair the splicing seams with putty, and use fine sandpaper to smooth the burrs on the right-angle edges. In this way, during the construction of wood grain melamine paper film, there will be no problems of bubbling and curling. The effect after the film can be satisfied by Party A.
After the decorative film is finished, the effect is as shown in the picture above (in order to show you the effect, there are two pieces that are not pasted). When sticking the film, it should be noted that try to use the whole sheet for filming. The depth of the grille in the above picture is 10cm, width 8cm, and height 3.6 meters. When cutting the film, we need to cut the film of 3.7 meters + 35cm for the whole sticking, and cut the remaining 1-3 mm at the right-angle closing position, so as to ensure that the bottom of the film is not leaked.
Tips for sticking film: sticking wood grain melamine paper requires long-term running-in and control of the construction site. How to reduce the wear and tear and stick the film well is not something that can be learned overnight. Responsible workers and teams provide security for each project project.
Custom message
