loading

How to use wood grain film wallpaper decorative film to wrap the stair glass handrail

by:I.DECOR     2022-09-11

How to use wood grain melamine paper wallpaper decorative film to wrap the stair glass handrail

2022-01-18 / Source: Wood Grain Melamine Paper / 240

In hotels or villas, in order to better fit the environmental style or protect the handrails, it is necessary to change the color of the glass stair handrails, and introduce a new environmentally friendly material - wood grain melamine paper. The important factors for sticking stair glass handrails with wood grain melamine paper are:
1. The combination of the reddish-brown simulated wooden feeling and the transparency of the glass makes the staircase increase the transparency of the space while conforming to the calm environment, and the staggered style improves the overall texture.
2. The surface of the wood grain melamine paper is wear-resistant, and the surface of the handrail will be frequently touched or bumped. Covering with the wood grain melamine paper can well prevent scratches on the surface of the handrail from affecting the overall effect.
3. The waterproof effect is good, and the position close to the ground will be in contact with water due to mopping, wiping, etc., and the surface of the wood grain melamine paper has high hardness and will not seep water, and there is no need to worry about mold and other problems in the southern region.
Construction method:
1. First measure the size of the place where the film needs to be applied on the top and bottom of the glass, analyze how many sections are needed, and then cut the wood grain melamine paper, and reserve about two centimeters as the loss of the crease, but it can’t be left too much, resulting in the final failure. Good crop.
2. The glass stair handrail is easy to operate. The first method can directly remove the glass, and then paste it with glass glue after the film is applied, which will greatly reduce the seams and the whole will be relatively complete. However, if the glass cannot be disassembled, the second method can directly close the seam at the position of the glass. The glass is resistant to high temperature. Finally, heat the edge with a hot air gun to increase the viscosity, so that it is not easy to curl.

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...