How to construct wood grain film wood grain decorative sticker film for ladder conference room

How to construct wood grain melamine paper wood grain decorative melamine paper film for ladder meeting rooms

2022-01-24 / Source: Modern Wood Grain Melamine Paper / 246

Nowadays, many conference rooms will adopt the step type, so that the space looks not only simple, but also can accommodate more people than the traditional seat type conference hall. The use of wood grain melamine paper to decorate the surface of the steps can not only satisfy the aesthetics of the conference room, but also And the wear resistance is relatively good. How to do this kind of building shape with curved sides, you need to pay attention to the following points:
1. First measure the size of the surface that needs to be pasted with wood grain melamine paper, plan how many pieces need to be cut, and pay attention to the grain of wood grain melamine paper when pasting the plane. The size of a roll of ordinary wood grain melamine paper is 1.22M*50M , Make the width of the step and the width of the wood grain melamine paper the same, so that there is no obvious interface when pasted.
2. After pasting the plane, fold the wood grain melamine paper to the side without closing the corners. If the closing position is placed on the outside corner, it will be curled due to frequent friction, and it will cause wood grain after long-term use. Melamine paper comes off. Therefore, it is best to place the closing position in a place where it is not easy to rub on an inner corner or a flat surface. Of course, if you want to do splicing on a flat surface, you need to refer to the previous tutorial on seam processing.

3. When sticking the side arc, you need to use a hot air gun to assist the operation. While hot blowing the wood grain melamine paper, gently pull it. After pulling out the approximate shape of the wood grain melamine paper, you can use a wool scraper to remove it. Air, continue the next film operation.
4. There are sockets on the side of the steps, so the shell of the socket needs to be removed during construction. When sticking to the vicinity of the socket, draw the position in advance, pull out the wires, and slowly stick the nearby wood grain melamine paper. After all the wood grain melamine paper is pasted, put the socket shell back on.