How to construct wood grain film decorative film for antique round fence - tutorial

by:I.DECOR     2022-11-18

How to construct wood grain melamine paper decorative film for antique round fence - tutorial

2021-04-14 / Source: Wood Grain Melamine Paper / 120

A tourist attraction, how does Gong use wood grain melamine paper for film construction, and how does the antique fence gate work? Let's introduce the construction method of wood grain decorative film through a case.
First of all, I will show you the door effect after the film is completed. The overall solid wood texture is strong, and the satisfaction of Party A is quite high after construction. There are many details that need to be paid attention to when using wood grain melamine paper film to construct this kind of shape. Next, we will analyze it step by step.



First of all, before filming, we still have to repeat the old words, that is, the basic flatness. If the certificate is not met, the effect of filming will be greatly reduced. This type of shape is shown in the picture above. There are many handover positions. Most of these places need to be leveled with putty. When skilled woodworkers make shapes, there will inevitably be gaps. These all need to be leveled.



We can analyze the shape into three steps: horizontal, vertical and wrapping. For this type of shape, we need to stick vertical strips first, and use the whole piece of wood grain melamine paper of sufficient length for the filming operation to paste the vertical stripes. Then paste the horizontal strips, this needs to be posted horizontal stripes. The last is the position of the arc, which needs to be affixed with horizontal stripes. In the splicing position of the interface, the vertical strip needs to reserve the corner position, and the horizontal strip can avoid the leakage of the bottom of the right-angle interface when the film is applied. Let's focus on how to deal with edging.



We need to use a whole piece of wood grain melamine paper for construction work on the outer edge. Familiar film masters know one thing. When the wood grain melamine paper is in a special shape, it is easy to stretch and deform from small to large, but it is big. It is very difficult to move to a small place. For the shape in the above picture, it is a typical problem of deformation from large to small. Specific steps are as follows:
1. When cutting the material, it is recommended to enlarge the original size by about 5-8 cm.
2. When sticking the film, simply stick the wood grain melamine paper from the top and outside, do not compact it.
3. Use a scraper to smooth out slowly, do not press on the wrinkled areas.
4. Use a hot air gun to heat the wrinkled area, and use a scraper to hang and flatten it lightly.
This step is a test of the proficiency of the heat gun and the control of the folds. A little carelessness can cause dead folds. It is recommended that you practice more.

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...