How to change the color of old and new wooden doors without paint and use wood grain film to solve

How to change the color of old and new wooden doors without paint, use wood grain melamine paper to solve

2021-02-23 / Source: Wood Grain Melamine Paper / 117

For newly renovated or old house renovation, if the replacement cost of wooden doors and furniture is too high, we can use wood grain melamine paper to achieve the replacement effect. After filming, it is comparable to new furniture. At the same time, the product is environmentally friendly and has no peculiar smell, which is more durable.

1. As shown in the picture above, this is the effect before the color change. It can be clearly seen that the door has scratches, and the effect is relatively old. When renovating and changing the decoration style, it does not match the original effect. If the whole set of doors is replaced, the construction period is slow and the cost is high. The later installation may not match the original door cover, and there may be problems such as abnormal noise.



2. For the effect after color change, use light-colored wood-grain melamine paper for overall bonding. In keeping with the interior decoration style. Reduce the trouble of renovation and reduce the construction cost. The good flexibility of wood grain melamine paper allows him to be handy in the application of special-shaped surfaces, and the fit effect can be changed.

The following summarizes some minor issues that need to be paid attention to during construction:
A. First try to dismantle the door and remove the hardware and so on.
B. Wipe the dust on the surface of the door frame and door panel to keep it clean and tidy. After the film is applied in this way, there will be no particles and uneven problems.
C. Use putty to fill and level the defects on the door frame and door panel, such as gaps and serious scratches.
D. Cut the whole piece of wood grain melamine paper and stick the film from the middle to both sides. For example, the door in the picture above has a concave and convex surface.
E. At the position of the concave and convex surface, use a heat extension machine to assist the construction, because the wood grain melamine paper can be deformed after heating. The temperature of the hot air blower should not be too high for construction.
F. After the film is finished, install the hardware of the lock, and use a hot air blower to heat and press it flat at the closing position of the corner, so as to ensure that the skin will not be peeled in the later stage.
G. Finally, it is recommended that you use imported wood grain melamine paper for construction. Domestic and joint venture films will have problems of reflection after heating, and quality problems will easily occur if they are not used for a long time.