Construction method of wood grain film

Construction method of wood grain melamine paper

2020-09-21 / Source: / 98

Recently, some friends will ask questions about the construction method of wood grain melamine paper. Today, I will subdivide it and explain it one by one. This makes it easy to understand the problems when choosing to use wood grain melamine paper. The construction method of wood grain melamine paper consists of several steps, repairing the base layer, cutting, brushing the primer, fixing the position, filming, trimming, and trimming the blister. Let's analyze it according to a set of diagrams.

The first step is to repair the base layer: This is a crucial link in the wood grain melamine paper film. If the base layer is not flat, the effect of the film will be affected. When repairing the base layer, the first choice is to use putty. After filling the potholes, nail holes, seams, etc. on the base layer, it is polished and smoothed, and you can touch it with your hands without the problem of hanging hands. (The white position in the above picture is the effect after leveling with putty)


The second step is to cut the wood grain melamine paper: this needs to be controlled by the size of the film. A qualified wood grain melamine paper film master will plan the order and angle of the film when filming, as well as the reserved edges. size to determine the size of the crop. (Reasonable cutting can reduce the loss of wood grain melamine paper film, the tools used are wallpaper knife, leaning bar, tape measure)



Step 3: Apply the base oil: Before applying the base oil, you need to dilute the base oil and mix it in a ratio of 1:3 (base oil: water), and then use a brush or roller brush to spread evenly after it is completely diluted. . After waiting for the base oil to dry, sand it with fine sandpaper to remove the floating dust.


The fourth step: fix the position of the film, which will have high requirements for the film master, and the quality of the film is also a crucial step. For example, the long film should be fixed in the first position first, so as to avoid the filming process. A misalignment occurs. Because the wood grain melamine paper is relatively firm after pasting, a single sticker may be damaged by tearing off and reworking.



Step 5: Trimming the wood grain melamine paper. This step requires the use of a wallpaper knife and a scraper to make the bonded wood grain melamine paper frame according to the actual size of the sticking surface, and the excess can be cut off.

Finally, to sum up: When sticking wood grain melamine paper, do not pursue speed. The film needs to be carefully and carefully so that the effect of the film can be displayed well and give users a satisfactory answer. Wood grain melamine paper construction method http://www.muwenmo.com details doomed to success or failure