Construction method and effect of using wood grain film on stair wall

Construction method and effect of using wood grain melamine paper on stair walls

2020-05-25 / Source: Wood Grain Melamine Paper / 49

Wood grain melamine paper products have the characteristics of moisture resistance and flame retardant, and are also widely used in staircase decoration. The editor will share with you a case about the decoration of office stairs. The specific construction method of wood grain melamine paper is as follows: In the decoration of office stairs, the first consideration for users is the moisture-proof and cleaning problems of the product. If you use ordinary wallpaper, it may have bad effects such as dampening and peeling after using it for a period of time. Say goodbye to blistering and peeling with wood grain melamine paper products. The construction method is as follows:

The first step is to test whether the wall is flat. If there are uneven grooves, you need to fill the wall with putty, and then use sandpaper to smooth it after drying to remove the floating ash.
The second step, before construction, need to use water to evenly spread the special wood grain melamine paper base oil on the wall according to the ratio of 1:1, then let it dry for 5 minutes, and then start the paste construction.
The third step is to cut the wood grain melamine paper according to the actual height required. In the position near the skirting line, it is necessary to reserve about 2-5cm more, which is convenient for correction after pasting.
The fourth step, cut off the excess unused wood grain melamine paper corners, if conditions permit, you can press the wood grain melamine paper cover under the skirting line at the position where the skirting line is connected.