What should I do if the drying is slow when printing veneer veneer?

There are many colors and styles of veneer veneer paper, which are suitable for a variety of styles of decoration. However, during printing, the ink layer is often slow to dry. What should I do?

First of all, it is necessary to know the reasons for this situation, mainly because the ink layer is too thick, the amount of ink is too large, or the additives used are not suitable, which leads to the slow drying of the grinding layer. The method of dark ink and thin printing can reduce the thickness of the grinding layer well, and it is also possible to use dry special ink. Then pay attention to the problem of additives. You can appropriately add a matching desiccant. The less water it contains, the faster the drying will be. And for the production workshop, the room temperature should be raised as much as possible, the evaporation rate should be accelerated, and proper ventilation should be carried out.

In the production of veneer veneer paper, if the ink layer dries very slowly, the production efficiency will be greatly reduced, so it is very necessary to take measures to solve this problem.