Special attention should be paid to the production process of melamine impregnated paper

Everyone already knows that the demand for melamine-impregnated paper in daily life is getting higher and higher, but correspondingly, we cannot change the original intention of the demand for quality because of the demand for quantity. Below we use the process standard of melamine-impregnated paper. Let's take a look at the points that need to be paid attention to in production.

The porous surface of the board is mainly due to the insufficient flow of the resin at high temperature or low pressure. In addition, the surface structure of the particleboard also has a certain influence on the veneer board. Therefore, the pressure can be increased to the maximum and the volatilization of the paper can be increased. content and resin content; increase the content of modifier to 0.5%, in addition, check whether the impregnated paper is stored for too long or improperly.

The delamination and bubbling of the panel, the delamination of the veneer mainly includes the following aspects:
①Resin waterproof paraffin, oil or paraffin coating on the surface of the particleboard;
② The resin content in the impregnated paper is very low, and the resin fluidity is too low, so that the resin on the surface of the particleboard is insufficient; ③ The moisture content of the particleboard is too low or the volatile content of the impregnated paper is too low.
Bubbling of the cloth occurs because the substrate is too thin or the moisture content is too high to generate water vapor during the veneer time, which causes bubbling when the press is turned on. Therefore, we can properly adjust the substrate and moisture content in production.

Damage to the edge of the board When the veneer is trimmed, the edge is damaged due to the tearing of the wood chips. The reason for the defect may be: the strength of the edge of the substrate is not enough; the shear strength of the surface of the substrate Not enough, or the shape of the tool, the sawtooth needs to be adjusted, the sawing speed is too low or the feed rate of the board is too fast is also one of the reasons. Therefore, in addition to purchasing high-quality substrates, the tools should be checked regularly.

The production process of melamine impregnated paper seems simple, but it is actually quite complicated in the operation process, which requires sufficient patience and rich professional knowledge and experience. For more knowledge about melamine impregnated paper, please continue to pay attention to the official website, thank you.

At the same time, as the recent research of I.DECOR shows, the benefits of improved productivity and firm performance can make implementing basic management practices worth it.
The expert engineers of I.DECOR Exp.Imp Co., Ltd. always develop with utmost precision so that all quality standards are met during the production. we are looking forward to becoming a trusted supplier of customers. visit us at I.DECOR decorative material.
Getting home design and decor from an idea to production is a complex process. It involves significant research, time, planning and patience. But with the right information, the right resources and the right product, it's possible.