How to stick DIY wood grain decorative film to have a longer service life

How to stick DIY wood grain decorative film to have a longer service life

2021-12-15 / Source: Modern Wood Grain Melamine Paper / 202

Many people will use wood grain melamine paper to refurbish furniture by themselves, but in the process of renovation, some problems will lead to poor use effect or reduced service life. Next, I will use the corner of the table to introduce the possible errors and Solution. 1. Finish the substrate. Uneven substrates may appear concave pits after pasting, which affects the appearance.

2. Reserve enough wood grain melamine paper to wrap it under the table top. If you cut at the end of the second side, it may cause curling due to frequent use. Wrapping three sides will make the finished product more complete.

3. Compact the interface. Press the seam, otherwise there may be air bubbles later.

4. Make a cut. First wrap the film cloth on the common surface of the table to the outside and then cut it neatly, otherwise irregular indentation will occur on the other side.

5. Then paste the other side and cut the excess film paper.
Finally, shrink it with a heat gun to make the film paper fit the desktop better.