How to glue veneer veneer to board

When applying veneer veneer paper products to boards, it is necessary to use the glue sticking process, so what are the methods?

A kind of glue sticking process method is cold pressing method, which can be glued on the base material of veneer veneer paper, and can also be glued on both the base material and the decorative board. More than the hot pressing method, it should be stacked for 24 hours after depressurization to further cure the resin. The second method is the hot pressing method, which is to apply glue on one side of the base material or decorative board. The glue application is most similar to the veneer. The back of the base material should be glued with a symmetrical layer to prevent the product from warping and deforming. However, in order to reduce the product cost and simplify the process, the decorative board and four veneers can be formed into a slab, and the gluing can be completed at one time.

Although the production efficiency of the hot-pressed adhesive is high and the gluing performance is good, the surface flatness is poor, and the roughness and unevenness on a certain material are easily reflected on the surface of the decorative board, so the bonding strength permits Under certain conditions, the low temperature and low pressure gluing process should be used as much as possible.