Analysis of the coating method of pvc wood grain film

Analysis of the coating method of pvc wood grain melamine paper

2020-08-26 / Source: Wood Grain Melamine Paper Construction / 92

The lamination method of PVC wood grain melamine paper is relatively simple. This also includes special-shaped lamination construction and ordinary lamination construction. The lamination methods including lamination on different bases are also different. Let's explain it one by one. First of all, let's talk about the special-shaped film of wood grain melamine paper: the common special-shaped films are arc, circle, diamond, bump wave, etc. There are also some special shapes such as big trees, animals, etc. When using wood grain melamine paper film, it is necessary to adjust the special-shaped film. The surface is finely treated. When applying the primer, you can use a high-concentration undiluted primer. After brushing and drying, you need to polish it to ensure smoothness. When sticking the film, choose imported genuine film, and use a hot air blower at low temperature to shape it. Do not use sharp objects to avoid tearing the wood grain melamine paper.

Then there is the ordinary flat film: this is mainly aimed at the large flat surface. This film is relatively simple. You only need to use the base oil diluted in proportion to brush evenly on the position that needs to be pasted, then dry it naturally, and polish it flat. You can directly apply the film. When this film is applied, the height of the film needs to be considered. For example, in our previous hotel construction, the height of the overall wall is 4 meters. This requires the entire width of the film, which is completed by using scaffolding to overlap 3 workers. Can.

Next, let's talk about the basic problem. 1. Stick the film on the base layer, do not apply varnish on it. Just apply the primer directly. 2. Stick the film on the gypsum board. Considering that there is a layer of paper on the gypsum board, when painting the primer, you can use pure oil or a small amount of diluted primer. After brushing and drying, re-sand to make sure it is flat. 3. For the metal base layer, when the wood grain melamine paper is applied to the film, there is no need to brush the primer, just clean the oil and sundries on the metal surface, and then directly apply the film after drying. 4. For latex paint walls, this can also be directly filmed with wood grain melamine paper. Before filming, use gypsum or putty to level the potholes on the wall, and then apply primer to remove the dust around the corners. Clean, you can directly stick the film

On the whole, the lamination method of pvc wood grain melamine paper also needs to be determined according to the base layer of the film and the effect of the film, and cannot be generalized. Communicate with Party A about the process and requirements of the film, and then provide on-site guidance and suggestions for the processing and production of the base layer. This will make the film more smooth and the effect of the film will be better.