What are the preparations for PVC wood grain film?

What are the preparations before the PVC wood grain melamine paper film

2020-08-08 / Source: / 88

PVC wood grain melamine paper needs to have a series of problems that need to be dealt with before filming, which is why it is necessary to arrange the filming master to go to the site for investigation. Only by doing the preparatory work for the film in the early stage, the film construction can get twice the result with half the effort. The details are as follows. The preparations required before the PVC wood grain melamine paper film are very important.



A First confirm whether the material at the attachment position is suitable for the film (the mushroom head base layer in the above picture is not properly handled). Generally, the adhesive surface with low density and insufficient flatness is not recommended to be filmed. It needs to be processed before construction. When treating the attached surface, you need to pay attention to the following characteristics: 1. For the surface treated with brushing, varnish, etc., it must be tested before the film is applied, and the surface pollutants, debris, etc. need to be cleaned, and then Foil. 2. For the surface that has undergone basic operations such as painting, sandpaper can be used to polish the surface before proceeding to the next step.

B Before the wood grain melamine paper product is filmed, it is necessary to compare the product with the user and confirm that it is correct, and then carry out the film construction (generally before signing the construction contract with Party A, the required wood grain melamine paper samples will be provided. .) C Confirm whether the base layer of the film is wet, if it is just approved for the wall, or there is water on the base layer, when the humidity is very high, try to avoid the film. It is necessary to wait for the base layer to dry before construction. Similarly, after professionally brushing the base oil on the base layer, you also need to wait for a few hours, wait for the base layer to dry, and then apply the film after grinding. In the construction of PVC wood grain melamine paper film, care needs to be taken seriously. After reviewing and confirming the construction site according to the above steps, the filming operation is carried out. Effective treatment of the base layer can improve the time of filming and the effect after filming. So this step cannot be missed.