The method and craftsmanship of using wood grain decorative film to change the color of the cabinet

The method and craftsmanship of using wood grain decorative film to change the color of the cabinet

2021-09-24 / Source: Wood Grain Melamine Paper / 165

Many novice PVC film friends do not know how to start when changing the color of the cabinet film. We will give you an in-depth analysis of how to use imported wood grain melamine paper to change the color of your cabinet film through a case. The method and process skills of using wood grain decorative film to change the color of the cabinet are as follows:


1. Size measurement
As shown in the figure above, measure the height of the cabinet's film area and the inner size of both sides, and then increase the loss by 5cm each. This is mainly to prevent the problem of dislocation and exposure of the bottom after the film is applied.


2. Find the center line
Find the center line according to the vertical board of the cabinet, the center line of the wood grain melamine paper and the center line of the cabinet to carry out film construction, and try to avoid excessive errors. Then do the internal filming.

3. Precautions for corner closing
Many novices cut directly along the bottom edge, which will cause the risk of revealing the bottom when sticking inside. It is recommended to cut with the details on the picture. Then, after the right-angle position is flattened, use a scraper to level and compact it from the outside to the inside.

When using wood grain decorative film to stick the cabinet, you also need to clean the dust inside the cabinet. After applying the primer, try to use fine sandpaper to polish the surface. This will give a smoother effect after the film is applied.