Decor Tour

Luoyang PU wood grain film construction case - special-shaped tree film tutorial

by：I.DECOR 2022-12-05

Luoyang PU wood grain melamine paper construction case - special-shaped tree film tutorial

2021-05-07 / Source: Wood Grain Melamine Paper / 125

How to use PU wood grain melamine paper for film construction of special-shaped trees, let's analyze how to operate through a case.
The picture above is the effect of using PU wood grain melamine paper film after construction. This big tree shape was painted by Party A before the film was applied, but the effect was not ideal. The veneer sticking process was carried out again (the problem of frying and peeling at the corners after sticking the veneer) did not meet the acceptance criteria. Then the film construction of wood grain melamine paper was carried out.
For the special-shaped film, what we need to consider is the position of the closing and the process of the film, and we analyze them one by one.
1. At the closing position, the tree in the picture above uses PU film on the trunk of the tree. The outer vertical edges need to be covered with film. The outer side must be pasted first. This is the first step.
2. After the outer side is pasted, the inner side of the film is applied, so as to ensure that there will be no problem of gap exposure after the film is applied.
3. For the branch part, paste it on the top first, and then paste it on the bottom so that the splicing interface can be reserved upwards. If you watch from the bottom, it is not easy to find the knife edge.
After the film is completed, use a hot air blower to heat the corners and close the corners, so that the effect is longer and the service life is longer.