Indoor wall wood grain decoration wood grain paper furniture stickers self-adhesive method

Indoor wall wood grain decoration wood grain paper furniture melamine paper self-adhesive method

2022-02-21 / Source: Modern Wood Grain Melamine Paper / 255

Many people will choose wood grain melamine paper to change the color of furniture in order to save costs or satisfy their own hands-on experience, but without the right method, it may be easy to curl, wear, or even fall off in use, so come and learn the correct one. How to use it. 1. First, measure the size of the surface that needs to be covered, and then cut out the appropriate wood grain melamine paper, remember to reserve the lost part. Under normal circumstances, the loss of sticking a flat surface is relatively small, but coating a special-shaped surface such as a curved surface may require nearly 20% of the loss.

2. If you want to pursue a long service life and a good visual effect, you need to apply primer to increase the firmness of the wood grain melamine paper and the base layer. When painting, you must pay attention to all the paint, and it can be used in a large area. Rolling brush, a small area needs a small brush to paint all the details, so as to ensure that there will be no partial blistering effect after the wood grain melamine paper is pasted.

3. When cutting the wood grain melamine paper you need, try to put it on the mat or cardboard to prevent the decorative surface from being worn and the effect of sticking is not good. Although there are scales on the surface of the release paper, it is better to use a support or a wooden stick to cut the film to prevent the loss of the film caused by hand shake.

Fourth, no matter what surface it is attached to, it is necessary to do a good job of positioning first, and use a wool scraper to remove air bubbles from the middle to both sides, so as to ensure that air bubbles can be removed in a short distance, and it will be relatively convenient to adjust later. After all the stickers are pasted, scrape from the other direction to fully press the wood grain melamine paper to prevent foaming and lead to fall off later.

5. Finally, use a hot air gun to blow the uneven places and corners at a low temperature. After the wood grain melamine paper is softened, it will be easier to pull and shape, and it can also increase the viscosity of the adhesive.