How to stick wood grain decorative film with good edge cutting effect - PVC wood grain film construction skills

How to stick wood grain decorative film with good edge cutting effect - PVC wood grain melamine paper construction skills

2021-11-19 / Source: Wood Grain Melamine Paper / 181

When using wood grain melamine paper decorative film for film construction, how to cut and close the edge of the right angle and the column edge can achieve good results. There is no problem. Today, I will tell you their methods and skills. 1. In the above picture, we can see that the entrance of the corridor has right angles on the left and right sides. When using wood grain melamine paper decorative film for construction, generally novices will cut the right angle at the straight edge position, so that the problem of curling is easy to occur after the film is applied. Mainly in daily use, it is often encountered that users hold the corner of the corridor, which will cause quality problems in later use. To solve this problem, we need to cut the first layer neatly along the right-angle edge when sticking the film, and stack it. For lamination, an extra 10cm is required to be pressed on the first layer, so that the right-angle position is formed into a process without cutting incision, and the use is more firm and durable.

2. When the wood grain decorative film is used for the display cabinet, there is a right-angle position in the horizontal direction. Generally, beginners will finish the facade, cut it at the right-angle position, and place it on the top surface of the film, so that there will still be a knife edge at the right-angle position. question. Problems and damage will occur during use and later maintenance and cleaning. We need to consider the size of the top and side of this type of modeling film. If it is within 1.2 meters, the entire film can be directly used for film construction. For example, in the above picture, we need to paste the position of the short side first, and then paste the position of the long side. Also, stack 10cm at the right angle of the vertical side, then attach the entire film directly on the top, and cut the top to the corner at a 45-degree angle. , so that the effect will come out after the film is finished.

Tips for the construction of wood grain melamine paper trimming decorative film But it is recommended not to stack within 1cm, which is almost useless.