How to paste wood grain film for furniture wall cabinets

How to paste wood grain melamine paper for furniture wall cabinets

2020-08-24 / Source: Wood Grain Melamine Paper / 91

In the process of tooling and home improvement, in order to make reasonable use of space, cabinets will be made on the wall to increase the effect. Conventional custom cabinets are costly and have a long cycle. There will also be bumps or inappropriateness during later installation. Now using wood grain melamine paper can be effectively solved.
As shown in the above picture, the whole wall cabinet is directly made on the wall, and the cabinet material is the size of the board and the wall directly formed at one time. After the production is completed, you can enter the decoration stage of wood grain melamine paper film. The specific methods are as follows: 1. Filling and leveling of seams and nail holes. Before pasting wood grain melamine paper, it is necessary to repair the seams and nail holes or glue points of the cabinet that affect the leveling, such as splicing. If the gap is too large, you can use putty or gypsum to fill the gap. Then smooth it out. 2. Apply primer with glue. Before pasting wood grain melamine paper, you need to apply special primer to the cabinet (remarks, if the base layer is a board, try to avoid painting the surface with varnish). After the base oil is dry, it is smoothed. It can also carry out the film construction of wood grain melamine paper.

3. Wood grain melamine paper cutting, this needs to be cut according to the grain trend of wood grain melamine paper. Remember to keep the splicing seam at the inner corner when sticking the film, so that it can be used for a long time without affecting the appearance. When overlapping, the trend should be considered to avoid bumping and peeling. 4. When filming the door handle of the cabinet, you can first determine the opening position of the handle, and try to apply the film first and then install the handle, so that the effect of no construction is the best. If the door handles and hinges have been positioned and installed, they need to be removed before filming. Note on the film: When the cabinet is filmed, the grain trend of the wood grain melamine paper should be considered. Do not leave the joints in the corners and overlapping parts where it is easy to hang, so that the problem of peeling is not easy to occur when using it.