Aluminum plate aluminum square pass uses pvc wood grain film process

Aluminum plate aluminum square pass uses pvc wood grain film process

2020-11-30 / Source: / 106

At present, a large number of aluminum squares and aluminum plates are used for construction and decoration in the construction of the tooling market. When the wood grain melamine paper is used to change the color of it, the effect of the designer can be quickly achieved. The construction method is as follows
When using wood grain melamine paper to film the aluminum plate, you need to pay attention to several links:
1. The surface of the aluminum plate needs to be cleaned, which can be wiped clean with a towel, because after the aluminum plate is produced, there will be crumbs and oil on the surface.
2. Primer should be applied around the corners of the aluminum square pass. This step is very important. After painting, it can make the paste more firm.
3. The film needs to use a special wool scraper, so the film can greatly reduce the damage to the surface of the wood grain melamine paper. Some aluminum squares have sharp edges and corners, and the use of wool scraper can avoid the occurrence of damage.
4. Leveling of solder joints, this needs to be leveled with atomic ash. The higher the surface flatness, the better the effect after filming.

{In the picture above, there is a solder joint gap on the aluminum square pass. This will cause damage and blistering problems when the film is applied. The atomic repair needs to be performed before the film is applied. }