1. Wet paste
2. Cut stickers;
3. Pre-stick, measure whether the size of the cut sticker is suitable, and trim it;
4. Use a hand-held watering can to spray liquid to the object to be attached;
5. Remove all the protective layer of the sticker, cover the sticker on the object and flatten it (faster);
6. Scrape out excess liquid and gas with a scraper;
7. Wait, about a day to dry.
Second, dry paste
1. The size of the sticker has been determined in advance;
2. Select two points on the sticker, the two points are the Z long distance of the sticker;
3. Uncover the protective layer at two points respectively, about 1cm----2cm;
4. Fold the uncovered protective layer to the edge of the sticker. 'Outside' is important;
5. Paste the sticker on the object to be attached, in fact, only those two points are attached:
6. Pull out the 'outer' protective layer in the direction of the sticker, and press while pulling;
7. Poke the needle after Z, and then press the air bubbles. Finish.
3. Cleaning and maintenance methods of imitation solid wood grain paper furniture
1. It should be placed smoothly to prevent damage to the mortise structure.
2. Do not expose to the sun to prevent deformation.
3. It should not be placed in a damp and non-ventilated place, otherwise it will be easily damaged by moisture expansion.
4. For furniture such as large wardrobes, heavy objects cannot be placed on the top of the cabinet, otherwise the door frame will be easily deformed.
5. For furniture made of plywood, do not rinse with water to prevent the plywood from degumming. General stains can be removed by washing, and serious stains can be removed by Wanjieling.
6. If there are cracks in the furniture, use putty and paint to mix well and then embed them flat to prevent the cracks from extending and expanding.
7. Put some prickly ash, camphor, or tobacco leaves in the furniture to prevent the entry of mice, worms and cockroaches.
8. Do not wash with alkaline water and boiling water to prevent damage to the paint surface.
9. If the surface of the furniture is stained with alkaline water or stains, it should be cleaned with water in time, and then waxed.
